Compact Self-Contained Design
The ice-making mechanism and 12 kg storage bin are integrated into one cabinet. This arrangement keeps ice production and storage together instead of requiring a separate modular bin.
The Naixer TH-E30 commercial undercounter ice machine produces up to 35 kg (approximately 77 lb) of full cube ice per 24 hours. Its self-contained design includes a 12 kg built-in ice storage bin, making it suitable for small cafes, bars, restaurants and office breakrooms. The air-cooled machine uses R290 refrigerant and features a 220V/50Hz electrical supply with 330 W rated power. Ice size: 22 × 22 × 22 mm.
The Naixer TH-E30 is a compact commercial undercounter ice machine designed for cafes, bars, small restaurants, and office breakrooms. It produces up to 35 kg (approximately 77 lb) of full cube ice per 24 hours and includes a 12 kg built-in ice storage bin.
This self-contained, air-cooled cube ice maker combines ice production and storage in one compact cabinet. It produces 22 × 22 × 22 mm full cube ice and uses R290 refrigerant with a 220V/50Hz electrical supply and 330 W rated power.
Small commercial operations often need a dedicated ice supply without allocating floor space to a large modular ice machine and separate storage bin. The TH-E30 combines a compact ice-making unit with integrated storage for businesses that need ice close to their beverage preparation area.
The ice-making mechanism and 12 kg storage bin are integrated into one cabinet. This arrangement keeps ice production and storage together instead of requiring a separate modular bin.
The TH-E30 is rated to produce up to 35 kg of full cube ice per 24 hours under the specified test conditions. It is intended for smaller commercial operations with moderate daily ice requirements.
The integrated storage compartment holds up to 12 kg of produced ice. It provides an on-site reserve for routine beverage service without requiring a separate storage bin.
The TH-E30 uses an air-cooled refrigeration system with R290 refrigerant. Its listed electrical configuration is 220V/50Hz with 330 W rated power.
The TH-E30 is designed for compact commercial equipment layouts, including suitable undercounter locations. Before ordering, measure the actual clear opening beneath the counter and check the machine's width, depth, height, ventilation, and service-access requirements.
Important height check: The TH-E30 is approximately 855 mm high. A nominal 34-inch opening is about 864 mm, leaving only around 9 mm of height difference before any additional installation clearance is considered.
Measure the finished opening rather than relying only on the nominal countertop height. The required ventilation and service clearance must follow the final installation instructions supplied for the machine.
The TH-E30 produces standard full cube ice measuring 22 × 22 × 22 mm. Its uniform square shape is suitable for a range of everyday commercial beverage applications, including iced coffee, soft drinks, mixed beverages, and restaurant service.
Full cube ice provides a consistent format for drink preparation and portioning. Buyers should consider cube dimensions, daily consumption, and the available storage capacity when choosing a machine for a particular beverage program.
Daily ice production and ice storage capacity describe two different functions of a commercial ice machine. The TH-E30 is rated to produce up to 35 kg of ice over 24 hours, while its built-in storage bin has a capacity of 12 kg.
This is the machine's rated quantity of ice production over a 24-hour period under the specified test conditions. Actual output can vary with ambient temperature, water temperature, and operating conditions.
The built-in bin stores up to 12 kg of produced ice. Its capacity is separate from the daily production rating and should be considered when planning peak-period usage.
The TH-E30 is designed for compact commercial environments where a built-in ice storage compartment and a moderate daily ice output are appropriate. It can be considered for beverage-focused operations that need ice close to the point of service.
Supply full cube ice for iced coffee, cold brew, iced tea, and other chilled beverage preparation.
Keep a compact source of beverage ice near the service counter for soft drinks and mixed drinks.
Provide ice for dining service and beverage preparation in operations with moderate daily ice demand.
Supply ice for staff beverage areas and shared refreshment spaces where a plumbed commercial machine is preferred.
Support selected beverage counters, small bars, and hospitality service points with suitable daily ice demand.
Provide an integrated ice production and storage option where floor space is limited and a larger modular system is unnecessary.
The TH-E30 specification sheet lists several operating functions designed to support routine ice production and machine protection.
The listed automatic water intake function supports the machine's normal ice-making process without requiring manual filling for each production cycle.
A low-water alarm is listed as a product feature to indicate a water-supply condition that requires attention.
Ice production stops automatically when the storage bin is full, according to the product specification sheet.
The specification sheet lists automatic over-temperature and over-pressure protection as operating safety features.
Review the TH-E30 technical specifications when comparing compact commercial undercounter ice machines for cafes, bars, offices, and small restaurants.
| Model | TH-E30 |
|---|---|
| Machine Type | Built-In / Self-Contained Commercial Ice Machine |
| Ice Type | Full Cube Ice |
| Daily Ice Production | 35 kg per 24 hours (approximately 77.2 lb) |
| Built-In Ice Storage Capacity | 12 kg (approximately 26.5 lb) |
| Ice Dimensions | 22 × 22 × 22 mm |
| Cooling Type | Air-Cooled |
| Rated Voltage | 220 V |
| Rated Frequency | 50 Hz |
| Rated Power | 330 W |
| Refrigerant | R290 |
| Machine Dimensions (W × D × H) | 420 × 595 × 855 mm |
| Approximate Dimensions | 16.5 × 23.4 × 33.7 inches |
| Net Weight | 20 kg |
| Water Inlet Pressure | 1–5.5 bar |
| Water Hardness | 0–8 °dH |
| Operating Ambient Temperature | 5–40°C |
| Ambient Humidity | 10%–80% |
| Waterproof Rating | IPX3 |
| Production Test Ambient Temperature | 25°C |
| Production Test Water Temperature | 20°C |
The TH-E30 is an air-cooled, water-fed commercial ice machine. Installation planning should cover the electrical supply, water inlet, drain connection, ventilation, and space for routine service.
The listed electrical specification is 220V/50Hz with 330 W rated power. Confirm that the local supply and electrical connection match the final machine nameplate.
The specification drawing identifies a water inlet and filter connection. Confirm the required water source, pressure, filtration arrangement, and connection fittings before installation.
The TH-E30 specification drawing identifies a drain connection. Plan a suitable drain route and verify the required hose position and connection details with Naixer.
As an air-cooled model, the TH-E30 needs its ventilation openings kept unobstructed. Allow access for inspection and maintenance according to the installation instructions.
Review the model-specific specification sheet before ordering. For installation details, operating procedures, or destination-market requirements, request technical support from Naixer.
The TH-E30 is rated to produce up to 35 kg (approximately 77.2 lb) of full cube ice per 24 hours. Its specification sheet lists test conditions of 25°C ambient temperature and 20°C water temperature.
The TH-E30 has a built-in ice storage capacity of 12 kg (approximately 26.5 lb). The storage capacity is separate from the 35 kg daily production rating.
The TH-E30 produces full cube ice measuring 22 × 22 × 22 mm.
Yes. The TH-E30 combines the ice-making system and a 12 kg storage bin in one built-in machine configuration.
The specification sheet lists dimensions of 420 × 595 × 855 mm (W × D × H), with a net weight of 20 kg. Confirm the final installation opening and service clearance before ordering.
The machine is approximately 855 mm (33.7 inches) high. Measure the actual clear opening beneath the counter and allow for any additional ventilation and maintenance clearance. A nominal countertop height alone does not confirm that the machine will fit.
The TH-E30 specification sheet lists 220V/50Hz power and 330 W rated power. Confirm local electrical compatibility and the final unit nameplate before installation.
The TH-E30 uses R290 refrigerant. Refer to the machine nameplate and technical documentation for refrigerant service information.
The TH-E30 is an air-cooled commercial ice machine. Its ventilation openings should remain unobstructed during operation.
Yes. The TH-E30 specification drawing identifies an ice-making water inlet, filter connection, and drain connection. Confirm the connection details and installation layout with Naixer before preparing the site.
The TH-E30 is designed for compact commercial operations such as small cafes, bars, restaurants, office breakrooms, and selected hotel beverage areas with moderate daily ice requirements.
Contact Naixer through the factory contact page . Provide your country, business type, estimated daily ice demand, purchase quantity, and installation dimensions to help the team review the correct machine for your project.
Compare the TH-E30 with other Naixer built-in bin cube ice machines when your business needs a different daily production or storage capacity.
We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.
We're online and ready to help!
Tell us about your commercial ice machine requirements. We'll prepare your inquiry for WhatsApp.
Have a question about a commercial ice machine? Send us a message and continue the conversation on WhatsApp.
Sign up to receive $50 off your first order and exclusive access to our best offers.