Large 50 mm Square Ice
The TH-DF130 produces 50 × 50 × 50 mm square ice cubes. This large-format ice is suited to beverage programs where cube size and presentation are part of the serving experience, including whiskey and craft cocktails.
The Naixer TH-DF130 is a commercial square ice cube maker designed for bars, restaurants, hotel lounges and beverage businesses requiring large-format square ice. It produces up to 59 kg of 50 × 50 × 50 mm ice cubes per 24 hours under the specified test conditions. The machine features a 20 kg built-in storage bin, 35 ice grids, air-cooled refrigeration and R290 refrigerant. Standard listed electrical configuration: 220V/50Hz, 820W.
Looking for a commercial square ice cube maker for your bar, restaurant or hospitality business? The Naixer TH-DF130 is designed to produce large-format 50 × 50 × 50 mm square ice cubes for premium beverage service. With a rated production capacity of 59 kg per 24 hours and a built-in 20 kg storage bin, it combines ice production and storage in one commercial machine.
The TH-DF130 uses an air-cooled refrigeration system with R290 refrigerant. Its listed standard electrical configuration is 220V/50Hz with an 820W rated power input. These specifications give beverage businesses a practical starting point for evaluating production capacity, installation requirements and daily ice demand.
Production rating is specified at 21°C room temperature and 10°C water temperature. Actual output can vary with operating and installation conditions.
Choosing a commercial square ice machine involves more than selecting an ice shape. Buyers need to understand the cube dimensions, daily production, available storage, electrical requirements and the operating features that support routine use. The TH-DF130 combines these considerations in a self-contained 50 mm square ice machine.
The TH-DF130 produces 50 × 50 × 50 mm square ice cubes. This large-format ice is suited to beverage programs where cube size and presentation are part of the serving experience, including whiskey and craft cocktails.
The machine is rated to produce up to 59 kg of ice over 24 hours under the stated test conditions. This production figure helps buyers compare the equipment with their expected daily ice demand.
The TH-DF130 includes an inner ice storage capacity of 20 kg. Production capacity and bin capacity are separate specifications, so both should be considered when planning for busy service periods.
The listed configuration uses air-cooled refrigeration and R290 refrigerant. The installation area should provide suitable ventilation and access to the required water, drainage and electrical connections.
The TH-DF130 specification sheet lists 35 ice grids. This is a useful technical detail when comparing square ice machines with different ice-forming configurations.
The product specification lists automatic water intake, low-water alarm, automatic stop when the bin is full, and over-temperature and over-pressure protection.
A square ice cube maker is a type of ice machine designed to produce cube-shaped ice for beverage service and other commercial applications. The actual cube dimensions vary by model. Standard full-cube ice machines typically produce smaller cubes, while large square ice machines are selected for drinks that call for a more substantial ice format.
The Naixer TH-DF130 is designed for 50 × 50 × 50 mm square ice. Each side measures 50 mm, which is approximately 1.97 inches. This is commonly described as a 2-inch square ice cube, although the precise catalogue dimension is 50 mm.
50 mm square ice vs. standard small cubes: Large-format ice has a lower surface-area-to-volume ratio than the same amount of ice divided into many smaller cubes. This can influence how ice interacts with a drink. Actual melting and dilution depend on beverage temperature, glassware, handling and serving conditions; no fixed melting-rate improvement is claimed for this model.
If your business needs a different cube size, explore the Naixer Square Ice Machine Series to compare available square ice formats.
Watch the product video to see the machine and its square ice production design. For a purchasing decision, compare the video with the technical specifications and installation requirements listed on this page.
Large square ice is often selected for beverage programs where the size and appearance of the ice are part of the presentation. The TH-DF130 can be evaluated by businesses that specifically require 50 mm square ice and have suitable daily production and storage requirements.
Whiskey bars and tasting lounges may use large square ice for on-the-rocks service. The 50 mm cube format offers a distinctive presentation in rocks glasses and other suitable beverage glassware.
Cocktail venues serving drinks such as the Old Fashioned and other spirit-forward recipes can evaluate large square ice as part of their beverage presentation.
Hotel bars, executive lounges and hospitality venues can consider the TH-DF130 when their beverage program calls for large square ice and their expected demand is compatible with its rated output and storage.
Restaurants with dedicated cocktail menus or premium beverage service may use a separate square ice machine to support the drinks that require a large-format ice cube.
Specialty cafés serving selected iced beverages can evaluate 50 mm square ice where the drink recipe, glass size and presentation are suited to a large cube.
Private clubs and tasting rooms may require a dedicated source of large square ice for selected drinks and guest service. Daily demand should be assessed before choosing the machine.
When comparing a commercial square ice cube maker, buyers should distinguish between daily ice production and storage capacity. These specifications describe different aspects of the machine.
Daily production — 59 kg/24h: This is the catalogue-rated production over a 24-hour period under the stated test conditions.
Built-in storage — 20 kg: This is the stated capacity of the machine's inner ice storage bin. It is not the machine's 24-hour production figure.
A business that serves most of its cocktails during a short evening period may have different storage requirements from a venue that uses ice gradually throughout the day. Consider both total daily demand and the busiest service window before choosing a commercial ice machine.
The TH-DF130 is rated at 59 kg per 24 hours and has a 20 kg storage capacity. These figures provide a starting point for assessing whether the machine matches your operation. Actual output and available ice at any given moment depend on usage and operating conditions.
The following table summarizes the core technical information listed in the TH-DF130 model specification. For site planning, buyers should also confirm the latest installation drawing and destination-market configuration with Naixer before ordering.
| Model | TH-DF130 |
|---|---|
| Machine Type | Commercial Square Ice Cube Maker |
| Daily Ice Production | 59 kg / 24h (approximately 130 lb / 24h) |
| Ice Cube Dimensions | 50 × 50 × 50 mm (approximately 1.97 inches per side) |
| Ice-Forming Grids | 35 |
| Built-In Storage Capacity | 20 kg (approximately 44.1 lb) |
| Cooling Type | Air-cooled |
| Rated Power | 820W |
| Rated Voltage | 220V |
| Rated Frequency | 50Hz |
| Refrigerant | R290 |
| Net Weight | 64 kg |
| Water Inlet Pressure | 1–5.5 bar (as listed in the model specification) |
| Inlet Water Hardness | 0–8 °DH (as listed in the model specification) |
| Production Test Conditions | 21°C room temperature / 10°C water temperature |
The machine dimension drawing and technical table in the currently available specification PDF show different height values. Please request the corrected dimensional drawing before finalizing cabinet openings or installation clearances.
The TH-DF130 specification lists several features intended to support routine machine operation and maintenance.
For the exact operation of controls, cleaning procedures and maintenance intervals, follow the instructions supplied with the machine and confirm the final configuration with Naixer.
A commercial square ice machine should be installed according to its electrical, water supply, drainage and ventilation requirements. Before ordering the TH-DF130, review the following points with your installer or Naixer sales representative.
The listed standard configuration is 220V/50Hz with an 820W rated power input. Confirm that your local supply matches the machine nameplate and the configuration being quoted.
Prepare the water inlet and drainage connections before installation. The machine specification lists a water inlet pressure range of 1–5.5 bar and water hardness of 0–8 °DH.
The TH-DF130 uses air-cooled refrigeration. Provide suitable airflow around the machine and avoid blocking the ventilation openings. Confirm the final clearances using the approved installation drawing.
Follow the manufacturer's cleaning instructions for the ice storage area and water-contact components. Use the approved cleaning procedure and products rather than unverified chemicals or cleaning methods.
Installation note: The available Naixer commercial ice maker manual is a general B-series operating guide, not a TH-DF130-specific installation manual. Its general guidance should be read together with the final model label and the latest TH-DF130 installation documentation.
Download the model-specific specification for the production rating, ice size and technical configuration.
Download TH-DF130 Specification (PDF)General guidance covering installation, operation, cleaning, maintenance and troubleshooting. Confirm model-specific instructions before use.
View General Product Manual (PDF)The best square ice cube maker for a business depends on its drinks menu, daily demand, peak service hours and installation environment. Before selecting the TH-DF130, consider the following questions.
Confirm whether your drinks require 50 mm square ice or a smaller standard cube. The TH-DF130 is specified for 50 × 50 × 50 mm ice.
Estimate normal daily consumption and compare it with the rated 59 kg/24h production. Do not rely on the headline production figure without checking the test conditions.
Consider whether the 20 kg storage capacity is suitable for your busiest service window. Daily production and storage capacity should be assessed separately.
Check the electrical supply, water inlet, drain, ventilation and available installation space. Confirm all dimensions against the final factory drawing before fitting the machine into a counter or cabinet.
To compare other ice types and commercial machine configurations, visit the Naixer Commercial Ice Machine Product Center .
The TH-DF130 is specified to produce 50 × 50 × 50 mm square ice cubes. Each side is approximately 1.97 inches, commonly described as a 2-inch square ice cube.
The TH-DF130 has a rated production capacity of 59 kg per 24 hours, approximately 130 lb. The specification lists its production test conditions as 21°C room temperature and 10°C water temperature. Actual output may vary with operating conditions.
The TH-DF130 has a stated built-in storage capacity of 20 kg, approximately 44.1 lb. Storage capacity is separate from daily ice production.
The model specification lists 35 ice-forming grids. This describes the listed grid configuration and should not be interpreted as an independently verified number of finished cubes per production cycle.
The listed TH-DF130 configuration is air-cooled. Suitable ventilation around the machine is important during installation.
The TH-DF130 specification lists R290 refrigerant.
The listed standard configuration is 220V/50Hz with an 820W rated power input. Confirm local electrical compatibility and the machine nameplate before ordering.
The 50 × 50 × 50 mm square ice format is suitable for evaluating in premium beverage programs, including whiskey service and craft cocktails. Buyers should assess daily ice demand and storage requirements before selecting the machine.
The TH-DF130 specification lists 50 × 50 × 50 mm square ice. It should therefore be selected for the large-format ice requirement rather than assumed to produce a different standard cube size. Contact Naixer to compare other cube machine configurations.
You can use the model-specific specification sheet linked on this page. For a quotation, installation drawing or destination-market configuration, contact the Naixer team before placing an order.
The TH-DF130 is designed for businesses requiring large 50 mm square ice. If your operation needs a different cube size or production configuration, compare other models in the Naixer Square Ice Series.
Explore the Naixer Square Ice Machine Series
Browse Commercial Square Ice Cube Machines
For product specifications, destination-market electrical configurations or a factory quotation, contact Naixer with your expected daily ice demand, preferred ice size and installation requirements.
Contact Naixer for TH-DF130 Product Information and a Factory Quote
We use cookies to improve your experience on this website. You may choose which types of cookies to allow and change your preferences at any time. Disabling cookies may impact your experience on this website. You can learn more by viewing our Cookie Policy.
We're online and ready to help!
Tell us about your commercial ice machine requirements. We'll prepare your inquiry for WhatsApp.
Have a question about a commercial ice machine? Send us a message and continue the conversation on WhatsApp.
Sign up to receive $50 off your first order and exclusive access to our best offers.