BT-150 Small Commercial Ice Cube Machine for Bars and Cafés
The Naixer BT-150 small commercial ice cube machine is a self-contained, air-cooled undercounter ice maker designed for bars, cafés, restaurants, and hospitality operations. It produces up to 68 kg (150 lb) of 22 × 22 × 22 mm full cube ice per 24 hours and features a 51 kg (112.4 lb) built-in insulated storage bin.
Measuring 680 × 600 × 750 mm, the BT-150 combines ice production and storage in one commercial cabinet. Its compact undercounter configuration is designed for businesses that need a regular supply of full cube ice without installing a separate ice machine head and storage bin.
BT-150 Small Ice Cube Machine Specifications
Review the product specifications before confirming the installation space, electrical supply, water connection, and expected ice demand at your business.
- Model
- BT-150
- Daily Ice Production
- 68 kg / 150 lb per 24 hours
- Ice Storage Capacity
- 51 kg / 112.4 lb
- Ice Type
- Regular full cube ice
- Ice Size
- 22 × 22 × 22 mm
- Ice Cube Trays
- 80
- Machine Dimensions
- 680 × 600 × 750 mm (W × D × H)
- Machine Weight
- 50 kg
- Cooling System
- Air-cooled
- Ventilation
- Front ventilation louvers
- Refrigerant
- R290
- Rated Power
- 445 W
- Standard Voltage / Frequency
- 220V / 50Hz
- Operating Temperature
- 5–40°C
- Water Pressure
- 1–5.5 bar / approximately 100–550 kPa
- Cleaning Function
- One-touch automatic cleaning
- Warranty
- 3 years, subject to applicable terms
- Certifications and Standards
- NSF, ETL, CE, CB, KC, RoHS and ISO
The rated daily ice production is based on the specified test conditions of 25°C ambient air temperature and 20°C inlet water temperature. Actual output can vary with ambient conditions, inlet water temperature, ventilation, and machine operating conditions.
The standard electrical configuration is 220V / 50Hz. Contact Naixer to confirm availability if your project requires a different voltage or frequency.
Compact Undercounter Design with Built-In Ice Storage
The BT-150 combines an ice-making system and an insulated storage bin in one self-contained cabinet. This configuration is designed for commercial locations that need ice production close to the point of service while making use of limited floor and counter space.
Integrated Ice Production and Storage
The built-in 51 kg storage bin keeps produced ice in the same cabinet as the ice-making system. The standard configuration does not require a separate storage bin.
Designed for Commercial Counter Areas
With a cabinet height of 750 mm, the BT-150 can be considered for selected bar and kitchen counter layouts. Measure the full installation bay before ordering, especially the 680 mm machine width.
68 kg Daily Ice Production and 51 kg Storage Capacity
When choosing a small commercial ice cube machine, compare the rated daily production with the quantity of ice that can be stored and accessed during service. These two capacities describe different parts of the operation.
Daily Production: 68 kg
The BT-150 is rated to produce up to 68 kg (150 lb) of full cube ice over 24 hours under the specified test conditions. This is a daily production rating, not the amount stored in the bin at one time.
Storage Capacity: 51 kg
The integrated bin stores up to 51 kg (112.4 lb) of ice. The bin provides an accessible reserve for service periods while the machine continues making ice as operating conditions allow.
Based on the rated 24-hour production, the theoretical average output is approximately 2.83 kg per hour. This is an arithmetic average, not a guarantee of identical hourly production throughout the day.
For a more tailored estimate, use the Naixer Ice Machine Size Calculator to estimate the daily ice requirement for your business.
22 × 22 × 22 mm Full Cube Ice for Commercial Beverages
The BT-150 produces regular full cube ice measuring 22 × 22 × 22 mm. This standard cube format is suitable for a range of everyday commercial beverage applications.
- Soft drinks and water service
- Iced coffee, cold brew, and iced tea
- Bar and cocktail preparation
- Restaurant beverage service
- Hotel and hospitality beverage stations
Ice size and shape affect beverage presentation, cooling, and dilution. Buyers should match the cube format to their menu, glassware, and serving style. The BT-150 is designed for regular 22 mm cube ice, rather than large-format square or specialty ice.
Applications of the BT-150 Small Commercial Ice Maker
Bars and Pubs
The built-in storage bin keeps cube ice close to the bar station. The BT-150 can be considered for beverage service where its daily production and storage capacity match the venue's demand.
Cafés and Coffee Shops
The machine can support iced coffee, cold brew, tea, and other chilled beverages. Check the available counter bay and ventilation before choosing an installation location.
Small Restaurants and Bistros
Restaurants can evaluate the BT-150 for front-of-house beverage service and selected kitchen applications. Compare peak demand with both the 68 kg daily production rating and 51 kg storage capacity.
Hotels and Hospitality
The BT-150 may be suitable for hotel bars, beverage preparation areas, and selected hospitality counters where an integrated cube ice machine and storage bin are preferred.
Undercounter Installation and Space Requirements
The BT-150 measures 680 mm wide × 600 mm deep × 750 mm high. Check the available installation space before constructing a counter opening. Allow for the machine cabinet, ventilation, water supply, drainage, and electrical access.
- Machine Width
- 680 mm
- Machine Depth
- 600 mm
- Machine Height
- 750 mm
- Suggested Opening Width
- 700 mm
- Suggested Opening Depth
- 620 mm
- Suggested Opening Height
- 760 mm
- Ventilation
- Keep front ventilation louvers unobstructed
- Utility Access
- Water inlet, drain, and electrical supply
The cabinet is 680 mm wide, so it will not fit into a 600 mm-wide cabinet opening. Plan a dedicated bay with suitable clearance. The front ventilation louvers must remain open while the machine is running.
Also plan the water inlet and drain routing before positioning the machine. Where rear access is limited, confirm the connection layout with the installer before the counter is finalized.
One-Touch Automatic Cleaning Function
The BT-150 supports a one-touch automatic cleaning function. This allows operators to initiate the machine's cleaning mode as part of routine equipment care.
Automatic cleaning does not replace regular sanitation, inspection, or manual maintenance. Follow the product manual for the correct cleaning procedure, approved cleaning agents, and required cleaning intervals.
- Use the cleaning function according to the manual.
- Keep the storage bin clean and sanitary.
- Inspect the front ventilation openings regularly.
- Clean the air-cooled condenser as instructed.
- Check incoming water quality and filtration needs.
Water, Drainage and Electrical Requirements
Confirm the site's utilities before installing the BT-150. Connect and operate the machine according to the product manual and applicable local requirements.
- Standard Electrical Supply
- 220V / 50Hz
- Rated Power
- 445 W
- Refrigerant
- R290
- Operating Temperature
- 5–40°C
- Water Pressure
- 1–5.5 bar / approximately 100–550 kPa
- Water Supply
- Suitable potable water supply
- Drainage
- Prepare drainage according to the installation manual
- Ventilation
- Keep front ventilation openings clear
Water quality can affect ice quality and maintenance frequency. Depending on local conditions, suitable water filtration may be recommended. Follow the manual for the required water connection, drainage, cleaning, and maintenance procedures.
The standard electrical configuration is 220V / 50Hz. Contact Naixer to confirm availability if your project requires a different local electrical configuration.
Certifications and Warranty
The BT-150 product documentation displays NSF, ETL, CE, CB, KC, RoHS and ISO marks. Buyers can request the applicable certificate documents and verify their scope for the destination market and equipment configuration.
The BT-150 has a 3-year warranty. Contact Naixer for written warranty terms, coverage details, and conditions applicable to the order.
BT-150 Small Commercial Ice Cube Machine Product Video
Watch the Naixer BT-150 product video for a closer look at the machine and its built-in cube ice design.
BT-150 Product Specifications and Manual Downloads
Review the technical documents before ordering or planning the installation. For project-specific questions, contact Naixer with your destination market and electrical requirements.
Model specifications, dimensions, performance, and installation data.
View BT-150 Spec SheetOperating instructions, control functions, cleaning, and maintenance.
View Product ManualCompare built-in cube ice machine models and their main specifications.
View Product BrochureFrequently Asked Questions About the BT-150 Small Ice Cube Machine
1. How much ice can the Naixer BT-150 produce per day?
The BT-150 is rated to produce up to 68 kg (150 lb) of full cube ice per 24 hours under the specified test conditions of 25°C ambient air temperature and 20°C inlet water temperature.
2. What is the built-in storage capacity of the BT-150?
The BT-150 has an integrated insulated storage bin with a capacity of 51 kg (112.4 lb). This is the bin's storage capacity, not the machine's daily production rating.
3. What size ice cubes does the BT-150 make?
The BT-150 produces regular full cube ice measuring 22 × 22 × 22 mm. This format is suitable for everyday commercial beverage service in bars, cafés, and restaurants.
4. How many ice cube trays does the BT-150 have?
The 2026 Naixer product brochure lists 80 ice cube trays for the BT-150.
5. Can the BT-150 be installed under a commercial counter?
The BT-150 is designed as a commercial undercounter ice machine. Its cabinet measures 680 × 600 × 750 mm. Check the actual installation opening, ventilation, water connection, drainage, and service access before installation.
6. What electrical supply does the BT-150 use?
The standard electrical configuration is 220V / 50Hz with a rated power of 445 W. Contact Naixer to confirm other configurations before ordering.
7. What water pressure does the BT-150 require?
The specified inlet water pressure is 1–5.5 bar, approximately 100–550 kPa. Confirm that the site's water supply falls within this range before installation.
8. Does the BT-150 support automatic cleaning?
Yes. The BT-150 supports a one-touch automatic cleaning function. Regular sanitation and maintenance are still required according to the product manual.
9. What refrigerant does the BT-150 use?
The BT-150 uses R290 refrigerant and an air-cooled refrigeration system.
10. What is the warranty period for the BT-150?
The BT-150 has a 3-year warranty. Contact Naixer for written warranty coverage and applicable terms.
11. What certifications and standards are associated with the BT-150?
The BT-150 product documentation displays NSF, ETL, CE, CB, KC, RoHS and ISO marks. Contact Naixer for the relevant documents and destination-market scope.
Compare Other Naixer Built-In Cube Ice Machines
If your required daily ice production or installation space differs from the BT-150, compare these models in the Naixer built-in cube ice machine range.
- BT-120 – 54 kg / 120 lb per 24 hours for a narrower 500 mm cabinet.
- BT-210 – 95 kg / 210 lb per 24 hours for higher daily cube ice production.
- BT-260 – 118 kg / 260 lb per 24 hours for higher-capacity commercial operations.
Browse the full Naixer Built-In Bin Cube Ice Machine range to compare available models.
Request a Quote for the Naixer BT-150
Looking for a small commercial ice cube machine for your bar, café, restaurant, or hospitality project? The Naixer BT-150 produces up to 150 lb (68 kg) of 22 mm full cube ice per day and includes a 51 kg built-in insulated storage bin.
Contact Naixer with your business type, expected daily ice demand, installation space, electrical supply, and purchasing quantity to discuss the right configuration for your project.
Request a BT-150 Quote Explore More Commercial Ice Machines




